background image

14

 Install Cabinet

1  Long Wood

Screw

 

    of Window Mounting.

    firmly on bottom board of wooden frame.

    removal. (See Fig. 5.)

4. Secure bottom rail to wooden frame with two large wood

    screws 1" (2.5 cm) long using the two holes in the

    bottom of the channel resting on frame. (See Fig. 6.)

support brackets. A wooden strip nailed to the outside wall 

should be used in conjunction with sill support angle 

brackets. (See Fig. 7.)

5. Screw or nail cabinet wooden frame using shims, if 

,

    Remember to maintain proper slope as described in Step 3.

    in Step 8 of Window Mounting.

NOTE: See Fig. 11 of Window Mounting

NOTE: After installing, make sure the air conditioner is tilted 3-4º to the outside to allow water drainage and 

 

perfect cooling efficiency. 

openings around top and sides of cabinet, and all sides 

of wood sleeve to the opening.

Instructions for bottom rail seal location.

MASONRY CONSTRUCTION

1. Cut or build a wall opening in the masonry wall

    similar to the frame construction (refer to Step 2

    of Thru-The-Wall Installation for wall thickness

    greater than 8-1/2").

2. Secure cabinet in place using masonry nails or

    the right masonry anchor screws. (Another way

    to do this is to build an in-between frame of

    2x4's as shown in Step 2 of Thru-The-Wall

    Installation but make it double framed on either

    side and install between masonry wall opening

    and cabinet. Frame must be securely anchored

    to masonry wall opening.) This way gives very

    good louver clearance on either side of cabinet.

3. Install a lintel to support masonry wall above

    cabinet. Existing holes in cabinet can be used

    and/or additional holes can be drilled to fasten

    cabinet at various positions. Be sure that side

    louver clearance is in accordance with Step 1 

    of Masonry Construction.

4. Install exterior cabinet support brackets as

    shown in Step 2 of Thru-The-Wall Installation.

    Caulk or flash if needed to provide a weather-

    tight seal around top and sides of cabinet.

5. To complete installation, apply wood trim

    moulding around room side projection of cabinet.

Fig. 6

Fig. 5

Fig. 7

Fig. 8

(See Fig. 8.)

Side Louvers

3~4

o

Support 

bracket

Sill angle bracket

Wooden strip

Содержание 3PACH18000



















Отзывы: