Perfect Aire 1PTC07A-3.5, Руководство пользователя

Страница: 11 / 15

10
HOW TO INSTALL THE UNIT
- For an existing wall sleeve, measure the sleeve’s
dimensions.
- Installation of the air conditioner according to these
instructions will assure the unit’s best performance.
All wall sleeves used to mount the new air conditioner
must be in good structural condition and have a rear
grille that securely attaches to the sleeve or the flange
of the sleeve to secure the new air conditioner.
- To avoid vibration and noise,make sure the unit is
installed securely and firmly.
- When installing the sleeve,make certain there is
nothing within 20" of the back that would interfere
with heat radiation and exhaust air flow. (See Fig. 2.)
!
CAUTION
There are sharp edges and extreme care should
be used to avoid serious cuts.
The air conditioner is heavy. Always use 2 people
when lifting or moving unit.
COOLED
AIR
INTAKE
AIR
WALL
WALL
HEAT
RADIATION
SLEEVE
Over 20
Fig. 2
Fig. 3
Fig. 4
Fig. 5
PREPARATION OF SLEEVE ASSEMBLY (optional)
- Refer to the installation instruction of sleeve assembly
for details.
UNIT INSTALLATION
- Carefully remove shipping tape from the front panel.
(See Fig. 3)
Shipping
tape
- Remove the shipping screw from the vent door. (See
Fig. 5)
- Remove the front panel. (See Fig. 4)
Shipping
screw
1067mm/42inch
408mm/16inch
606mm/23.9inch
Fig. 1a - Dimensions of Air Conditioner
376mm/14.8inch
408mm/16inch
1067mm/42inch
Fig. 1b - Dimensions of Sleeve
Assembly (optional)
- Pull out at the bottom to release it from
the tab .
- Then lift up .
PREPARATION OF REAR GRILLE ASSEMBLY (optional)
- Refer to the installation instruction of rear grille
assembly for details.
INSTALLATION