CTH407
V. 01 – 10/05/2016
4
©Velleman nv
3.
General Guidelines
Refer to the
Velleman® Service and Quality Warranty
on the last
pages of this manual.
Familiarise yourself with the functions of the device before actually
using it.
All modifications of the device are forbidden for safety reasons.
Damage caused by user modifications to the device is not covered
by the warranty.
Only use the device for its intended purpose. Using the device in
an unauthorised way will void the warranty.
Damage caused by disregard of certain guidelines in this manual
is not covered by the warranty and the dealer will not accept
responsibility for any ensuing defects or problems.
Do not use outside the technical specifications.
Keep this manual for future reference.
4.
Overview
Refer to the illustrations on page 2 of this manual.
1
on-off switch
4
SET knob
2
working LED
5
PROGRAM button
3
program LED
5.
Installation
WARNING
Make sure to cut off the mains power supply
before
installing the thermostat.
1.
Choose your installation spot. Install the thermostat in a well-
ventilated place and about 1.5 m (5 feet) above the floor, away
from direct sunlight, heat and interference sources.
2.
Remove the front cover using an appropriate screwdriver.
3.
Mount the thermostat on a flat surface. Drill two 6 mm holes and
insert a nylon anchor plug in each hole. Drill two 2.6 mm holes
when mounting the thermostat on a wooden surface.
Содержание CTH407
Страница 2: ...CTH407 V 01 10 05 2016 2 Velleman nv...