background image

 

CONTENTS: 

1. GENERAL INFORMATION..............................................................................................3

 

2. TECHNICAL SPECIFICATIONS......................................................................................4

 

3. DELIVERY SET ...............................................................................................................4

 

4. PRODUCT DESCRIPTION..............................................................................................5

 

4.1. Design ..............................................................................................................5

 

4.2. Operating principle ...........................................................................................5

 

4.3. Operation of the reader under Wiegand interface ............................................6

 

5. CONFIGURATION...........................................................................................................8

 

5.1. Indication setting ..............................................................................................8

 

5.2. Changing the format of the output data............................................................8

 

6. SAFETY REQUIREMENTS .............................................................................................9

 

7. INSTALLATION PROCEDURE .......................................................................................9

 

7.1. Features of installation .....................................................................................9

 

7.2. Tools and equipment required for installation.................................................10

 

7.3. The cables used.............................................................................................10

 

7.4. Assembly order ..............................................................................................11

 

8. TROUBLESHOOTING...................................................................................................12

 

9. PERCO WARRANTY.....................................................................................................13

 

WARRANTY CARD ...........................................................................................................15

 

 

Содержание RP-15.2



















Отзывы: