Assembly and Operation Manual
6 MARKING AND PACKAGING
The card capture reader has a marking - a label placed on the internal side of the back
panel. It contains the name of the product, designation, the date of manufacture, the serial
number.
The card capture reader in the standard delivery set (see Clause 4.1) is packed in a
transportation box that protects its components from damage during transportation and
storage.
Box overall dimensions (L × W × H) ............................................................ 110×24×24 cm
Box weight ......................................................................................................... max. 18 kg
7 SAFETY REQUIREMENTS
7.1 Installation safety requirements
Installation should be carried out by qualified personnel after careful study of this Manual
in accordance with general rules for electrical and installation works.
Attention!
While installation:
all works should be performed only with the power supply switched off from the
AC mains;
only serviceable tools should be used for installation;
while the installation of the card capture reader until it is fixed, be extra cautious
and protect it from falling down;
before the first switching of the card capture reader make sure it is installed
correctly;
do not connect the card capture reader to a power supply unit with voltage and
frequency different from those given in the Manual (Chapter 3).
Installation of the power supply unit should be done in compliance with safety measures
described in its certificate.
7.2 Operation safety requirements
Observe general electrical safety rules when operating the card capture reader.
Warning! Not allowed to operate the card capture reader:
under conditions that do not comply with the requirements of Chapter 2 of this
Manual.
at supply voltage that does not comply with the requirements of Chapter 3 of the
Manual.
The operation of the power supply should be done in compliance with safety measures
described in its certificate.
10
