Assembly and Operation Manual
Figure 7.
Wiring diagram card capture reader -
CT/L-04
1
controller
Table 2.
Wiring diagram elements
Position
Name
Q-ty
A1 RC
panel
1
A2
IC-02
card capture reader
1
A3*
CT/L-04
controller 1
A4* Power
supply
1
A5*
Reader for opposite to the card capture reader direction
1
1*
Card capture reader power cable
1
2*
Cable for ACS controller connection
1
3*
Cable for connection of the reader installed in a card capture reader (RS-485)
1
4* Reader
cable
1
* - equipment is not included in the standard delivery set.
1
Contact 1 “Card Captured” (**) at the
XT2
connector block of the card capture reader is
connected parallel to RC panel (A1) to contact 2 «
DU A»
or 4
«DU B»
of the
XT2
connector block.
The choice of the contact depends on the passage direction “A” or “B” set for collecting guest
cards.
14
