ASSEMBLY OF THE PERCEPTION PEDAL DRIVE
Installing the Crank Arms to the Drive Unit
1. Place the Perception Pedal Drive unit on a flat work
surface with the propeller (
G
) side facing upwards.
2. Align the propeller (
G
) so that it is parallel with
the shaft (
F
) of the pedal drive unit.
3. Locate the right crank arm (
D
) marked with an
“R”on the back side of the crank arm.
4. Place the right crank arm (
D
) spindle over the
right crank arm shaft of the pedal drive head unit (
M
).
5. The crank arm (
D
) should be parallel with the
propeller (
G
) and the shaft (
F
) of the drive unit.
6. Use an 8 mm hex/Allen wrench to tighten the crank
arm (
D
) to the system with a crank arm bolt (not
shown).
7. Repeat process with the left crank arm (
C
).
Note: It is imperative the propeller (G) and the crank
arms (C, D) are aligned properly during assembly for
the drive unit to be removed from the kayak using the
prop alignment marks (L) on the drive unit head (M).
Installing the Pedals to the Crank Arms
1. Locate the right pedal (
B
) identified by an “R” on
the face of pedal mounting bolt.
2. Thread the right pedal mount (
B
) into the right
crank arm (
D
). (reverse threading)
3. Use a 15 mm open-end wrench to tighten the
pedal (
B
) to the crank arm (
D
). Hold the opposite
crank arm (
C
) in place to generate resistance.
4. Repeat process with the left pedal (
A
).
3
Содержание PEDAL DRIVE
