PEQUEA SuperSpread PTO 135 Скачать руководство пользователя страница 10

SuperSpread™ is designed to travel safely at highway speeds, unloaded (empty). Attempting to transport 
spreaders that are loaded at highway speeds may cause damage to tires, bearings and may impair safe driving. 
See imprint on the sidewall for allowable highway speed. Never transport equipment on public roads without 
having safety chains installed and connected correctly to the towing vehicle.  

Chain should be of sufficient length to permit full turning radius and crossed when hitched to towing vehicle. See 
illustration below.

Check connection frequently on long trips.

 

8

NOTE: Transporting the machine with the rear section of the PTO assembly 

dangling from the jack shaft may damage this part.  The shield will be dented as a result 

of bouncing against the hitch, by the drawbar or bumper when left dangling, and dirt and 

grit from the road will accumulate on the critical internal sliding surfaces.  Remove the 

complete PTO assembly when towing the spreader with a truck.

Safety Chain

PTO Output Spline

Transporting

Operation Cont. 

Содержание SuperSpread PTO 135





























Отзывы: