PePWave Mesh Connector Series
10
Copyright © 2008 PePWave
PePWave Mesh Connector Series User Manual
4.3
Settings Details
4.3.1
LAN Interface
Illustration 4: LAN Interface
LAN Interface
: To configure the LAN interface’s IP address and subnet mask.
4.3.2
Wireless Settings
Illustration 5:
Wireless Settings
SSID
: To configure the SSID / ESSID / Network Name of the wireless network to associate
to.
Radio Mode
: The available radio mode for Mesh Connector 225-DX is 802.11a only.
Bit Rate
: To fix the 802.11 transmit bit rate. Available options depend on the Radio Mode
chosen. If “auto” is chosen, the device will choose the best bit rate dynamically and
automatically.
Authentication
: Available options are “Open”, “Static WEP Key”, “802.1x with dynamic
WEP key”, “WPA/WPA2-Enterprise” and “WPA/WPA2-Personal”. The selection should be
according to the setting of the access point you are associating to. Data transferred are
encrypted under all modes except in “Open” mode. When “Static WEP Key” or “WPA/WPA2-
Personal” is chosen, you should enter an encryption key in the Encryption Key field. You do
not need to use “802.1x” and “WPA/WPA2-Enterprise” unless instructed to do so by your
ISP.
Bridging Support:
This option enables the transparent bridging functionality with PePWave PolePoint to achieve
true layer two transparency.
