User Manual
http://www.pepwave.com
32
Copyright ©
2015
Pepwave
7.2.2 Settings
Basic access point operation settings, such as the protocol and channels used, as well
as scanning interval and other advanced settings, can be defined and managed in this
section.
AP Settings
Protocol
Choose
802.11ng
or
802.11na
as your access point’s Wi-Fi protocol.
The AP One AC mini provides the
802.11ng
protocol for the 2.4 GHz band and the
802.11ac
protocol for the 5GHz band, as shown below.
Operating
Country
This drop-down menu specifies the national / regional regulations the AP should follow.
If a North American region is selected, RF channels 1 to 11 will be available and the
maximum transmission power will be 26 dBm (400 mW).
If European region is selected, RF channels 1 to 13 will be available. The maximum
transmission power will be 20 dBm (100 mW).
NOTE: Users are required to choose an option suitable to local laws and regulations.
Per FCC regulation, the country selection is not available on all models marketed in the
US. All US models are fixed to US channels only.
Channel Bonding
There are three options:
20 MHz
,
40 MHz
, and
20/40 MHz
. With this feature enabled,
the Wi-Fi system can use two channels at once. Using two channels improves the
performance of the Wi-Fi connection.
The AP One AC mini offers channel bonding options for the 2.4GHz and 5GHz bands,
as shown below. In addition to
20 MHz
,
40 MHz
, and
20/40 MHz
, the 5Ghz band offers
80Mhz
, which is the default setting.
