User Manual
http://www.pepwave.com
19
Copyright ©
2015
Pepwave
To add a community for either SNMPv1 or SNMPv2c, click the
Add SNMP Community
button in the
Community Name
table, which displays the following screen:
SNMP Community Settings
Community Name
Enter a name for the SNMP community.
IP Address/IP
Mask
These settings specify a subnet from which access to the SNMP server is allowed.
Enter the subnet address here (e.g.,
192.168.1.0
) and select the appropriate subnet
mask.
Access Mode
Select
Read Only
or
Read and Write
as the SNMP community access mode.
Status
Use these controls to enable or disable SNMP community access.
To define a user name for SNMPv3, click
Add SNMP User
in the
SNMPv3 User Name
table, which displays the following screen:
SNMPv3 User Settings
SNMPv3 User
Name
Enter a user name to be used in SNMPv3.
Authentication
Protocol
Select one of the following valid authentication protocols:
NONE
HMAC-MD5
HMAC-SHA
When
HMAC-MD5
or
HMAC-SHA
is selected, an entry field will appear for the
password.
Authentication
Password
Enter a password to use with the selected authentication protocol.
