Barcode Scanner VB14
Safety Precautions
Subject to reasonable modifications due to technical advances.
Copyright Fuchs, Printed in Germany
Fuchs Group • Tel.: Germany (06 21) 7 76-0 • USA (330) 4 25 35 55 • Singapore 7 79 90 91 • Internet http://www.pepperl-fuchs.com
D
a
te
of
is
su
e
0
7/
18
/2
0
0
2
7
2.1.1
General notes
Warning labels indicating exposure to laser light and the device classification are
applied onto the body of the scanner (figure 1.1).
Warning and device class labels
Disconnect the power supply
when opening the device during maintenance or installation to avoid exposure to
hazardous laser light.
The laser diode used in this device is classified as a class 3B laser product according
to IEC 825-1 regulations and as a Class IIIb laser product according to CDRH
regulations. As it is not possible to apply a classification label on the laser diode used
in this device, the following label is reproduced on the right.
Any violation of the optic parts in particular can cause radiation up to the maximum
level of the laser diode (7 mW at 630 to 680 nm).
Laser diode class label
POWER SUPPLY
- Models VB14-
-
:
This accessory device is intended to be supplied by a UL Listed Power Unit with
"Class 2" or LPS power source which supplies power directly to the scanner via the
25-pin connector.
AVOID EXPOSURE-LASER LIGHT IS
EMITTED FROM THIS APERTURE
R
R
L
U L
U
CAUTION - LASER LIGHT WHEN OPEN
AVOID EXPOSURE TO BEAM
LISTED
ACCESSORY
45 AF
i.T.E.
LASER LIGHT
DO NOT STARE INTO BEAM
CLASS 2 LASER PRODUCT
MAX. OUTPUT RADIATION 1 mW
EMITTED WAVE LENGTH 630-680 NM
TO IEC 825-1 (1993)
This product conforms to the applicable
requirements of 21CFR1040 at the
date of manuffacture.
LASER LIGHT
AVOID EXPOSURE TO BEAM
CLASS 3B LASER PRODUCT
MAX. OUTPUT RADIATION 7 nW
EMITTED WAVE LENGTH 6 30~680 nm
TO IEC 825-1 (1993)
