Ultrasonic Double Sheet Monitor UDC-18GMA-400-3E2
Commissioning and parameter assignment
D
at
e of
ed
iti
on:
12
/1
7/
04
12
Subject to reasonable modifications due to technical advances.
Copyright Fuchs, Printed in Germany
Fuchs Group • Tel.: Germany (06 21) 7 76-0 • USA (330) 4 25 35 55 • Singapore 7 79 90 91 • Internet http://www.pepperl-fuchs.com
Notes:
Installation, commissioning and maintenance must only be performed by qua-
lified specialists. The sensor heads must be installed with great care. If the de-
vice is not used for a purpose for which it was intended, reliable functionality
of the double sheet control cannot be guaranteed. Making changes to or tam-
pering with the device is not permitted.
This sensor is not suitable for detecting contact points or labels.
Fuchs does offer equipment developed especially for
this purpose.
Extremely light papers (for example handkerchiefs) or perforated
papers (for example sheets of stamps) are not always suitable for
double sheet detection because of their physical characteristics.
Material that represent double sheets in and of themselves cannot
be used, for example multiply coated material with air cavities in
them. These may result from damage (kinking) of paper, for
example.
Due to the great variety of types of paper, cards and foils, we
strongly recommend trying out the desired range of detection
material as part of an approval procedure, for example, before
using the sensor.This will ensure optimal reliability in detection.
The sheets must not touch the sensor heads during operation.
Note
Note
Note
Attention
