2
0
1
7
-0
6
28
Configuration and Analysis with DTM via IO-Link
Synchronization tab
Figure 7.6
In the Synchronization tab, you can set the required synchronization mode if you want to
suppress mutual interference when operating several UC***-F77-...-IO-.. sensors. Details of
the individual synchronization modes can be found in the chapter "Synchronizing multiple
sensors."
Echo loss + Error handling tab
Figure 7.7
In the
Echo loss and error handling
tab, you can adjust the evaluation of a loss of echo and
the error output behavior of the sensor output.
Local controls tab
Figure 7.8
In the
Local controls
tab, you can lock or activate the programming button, or use a time lock
and display the status of the programming button (pressed/not pressed).
