Vibracon LVL-M2C
SI00113O-F
DO
CT
-0
56
0B
201
8-
10
1151
39
14
EN
Associated
documentation
This document is an integral part of the following documents: KA00162O
The documents which are supplied and correspond to the device type apply.
Supplementary
documentation
Explosion protection compendium
Manufacturer's
certificates
EU-Declaration of conformity
ATEX certificate
Certificate number: KEMA 01 ATEX 1089X
List of applied standards: see page 3
IEC certificate
Certificate number: IECEx DEK 16.0077X
Affixing the certificate number certifies conformity with the standards under www.IECEx.com
(depending on the device version).
• IEC 60079-0:2011
• IEC 60079-11:2011
• IEC 60079-26:2014
Manufacturer address
Fuchs GmbH
Lilienthalstraße 200, 68307 Mannheim, Germany
Internet: www.pepperl-fuchs.com
Other standards
Among other things, the following standards shall be observed for proper installation:
• IEC/EN 60079-14:2012: "Explosive atmospheres - Part 14: Electrical installations design,
selection and erection"
• EN 1127-1:2011: "Explosive atmospheres - Explosion prevention and protection - Part 1: Basic
concepts and methodology"
Extended order code
The extended order code is indicated on the nameplate, which is affixed to the device in such a way
that it is clearly visible. Additional information about the nameplate is provided in the associated
manuals.
Structure of the extended order code
Basic specifications
The features that are absolutely essential for the device (mandatory features) are specified in the
basic specifications. The number of positions depends on the number of features available.
The selected option of a feature can consist of several positions.
Optional specifications
The optional specifications describe additional features for the device (optional features). The
number of positions depends on the number of features available.
More detailed information about the device is provided in the following tables. These tables describe
the individual positions and IDs in the extended order code which are relevant to hazardous
locations.
Device type
Basic specifications
Probe length
LVL-M2C
–
XXXXXX-XXXXXX-XX
.
XXXX
X = Placeholder
At this position, an option (number or letter) selected from the specification is displayed
instead of the placeholders.
