Pepperl+Fuchs PSU-IDM160-BD-1D-J1-N0 Series, Руководство пользователя

Страница: 8 / 23

DANger!
Do not make any changes to the device that are not intended or been approved by
Fuchs.
Improper handling of the power module can void the type approval to operate in ex-
plosion-hazardous areas.
Non-compliance excludes warranty claims.
1.3. general Warning Messages
WArNINg!
Only operate the devices when assembled.
Do not clean the device in explosion-hazardous areas. Do not wipe it dry.
Switch off the device immediately if you believe that the device can no longer be
operated safely after damaging effects or abnormalities in general (ingress of
water, fluids, exposure to temperatures outside the specified range etc.).
Note general statutory regulations or directives on occupational safety, accident
prevention regulations and environmental protection laws, e.g., Ordinance on
Industrial Safety and Health (BetrSichV).
Do not open the device.
You may not make any changes to the device. You may not exchange or replace
any components. Explosion protection is no longer guaranteed for non-speci-
fied components.
Ensure safe handling during use through adequate stability and freedom of
movement.
Immediately remove the device from the explosion-hazardous area in the event
of damage to the housing.
IEC 60079-19 and IEC 60079-17 stipulate that you as the operator of electrical
plants in explosion-hazardous areas are obligated to appoint an electrician to
check that these plants are in perfect condition.
Do not insert any objects into the housing or other openings of the handheld
scanner. Openings on the device must not be obstructed, blocked, or covered.
Dispose of the device and the associated components correctly, as required by
law, by an approved company.
8
 I
mporTanT
n
oTes
a
bouT
T
he
I
nsTruCTIon
m
anual
2018-06