Pepperl+Fuchs M-LB 5000 Series Скачать руководство пользователя страница 7

Страница: 7 / 26

Functional Safety M-LB-(Ex-)5000-System

Product Description

201

8-03

Product Description

2.1

Function

This manual describes solely the safety function and safe state of the surge protection barrier

as part of the surge protection system. The surge protection barrier consists of a protection

module and a base module.

Surge Protection Barrier without Status Indication

The surge protection barrier without status indication consists of a M-LB-(Ex-)51** protection

module and a M-LB-(Ex-)50**(.SP) base module.

The protection module limits induced transients of different causes, e. g. lightning or switching

operations. The limitation is achieved by diverting the current to earth and limiting the signal

circuit voltage during the duration of the overvoltage pulse.

The device is inserted onto the base module and forms the surge protection barrier together

with the base module.

The device can be replaced without tools by a locking lever.

Surge Protection Barrier with Status Indication

The surge protection barrier with status indication consists of a M-LB-(Ex-)52** protection

module and a M-LB-(Ex-)50**(.SP) base module.

The protection module limits induced transients of different causes, e. g. lightning or switching

operations. The limitation is achieved by diverting the current to earth and limiting the signal

circuit voltage during the duration of the overvoltage pulse.

The device has LEDs for the status indication. If required, this status is transferred to the

corresponding function module via a status indication output.

This status indication is non-safety-relevant.

The device is inserted onto the base module and forms the surge protection barrier together

with the base module.

The device can be replaced without tools by a locking lever.

Danger!

Danger to life from wrong usage of the device

The protection of the safety loop against overvoltage is

not the safety function

of the surge

protection barrier.

The surge protection barrier protects applications and equipment against voltage surges

caused by lightning or switching operations.

The statement concerning the safety function of the surge protection barrier solely describes

the effect on safety loops in which the barrier is installed. The barrier acts in the safety loops as

a simple pass through element.

Содержание M-LB 5000 Series



























Результаты поиска

Содержание M-LB 5000 Series

Отзывы:

Похожие инструкции для M-LB 5000 Series

Бренды по названию

Популярные бренды

Pepperl+Fuchs M-LB 5000 Series, Руководство пользователя

Результаты поиска

Содержание M-LB 5000 Series

Отзывы:

Похожие инструкции для M-LB 5000 Series

Бренды по названию

Популярные бренды