Pepperl+Fuchs KFD2-HLC-1.D, Руководство пользователя

Страница: 22 / 44

Dat
e
of
iss
u
e
1
1
/30/
07
805639
HART Loop Converter KFD2-HLC-(Ex)1.D(.**)
Editing device data: Parameterization mode
20
The following table provides an overview:
Floating decimal numbers contain six elements, which you must enter individually: four digits for the
mantissa or three digits with minus sign for the mantissa, position of the decimal point in or after the
mantissa, exponent. Make entries as follows:
• When accessing the lowest menu level, the total current value of the floating decimal number
(mantissa and exponent) flashes first of all. Press OK again. The first digit of the mantissa (or the
minus sign) flashes.
• Now enter each number of the mantissa individually by pressing the
S
and
T
keys: numbers 0 to
9, minus sign in the first position below 0 (press the
T
key). Press OK to confirm each entry. The
next digit of the mantissa then flashes.
• When you enter the last digit of the mantissa, the digit after the decimal point flashes. Determine
the required position of the decimal point by pressing the
S
and
T
keys and press OK to confirm.
The exponent appears and begins to flash.
• Now enter the exponent value by pressing the
S
and
T
keys (values from E-33 and E00 to E33 in
three steps) and press OK to confirm.
Positive number Entry Negative number Entry
43 210 000 43.21 E06 - 3 210 000 -3.21 E06
4 321 000 4321 E03 - 321 000 -321 E03
432 100 432.1 E03 - 32 100 -32.1 E03
43 210 43.21 E03 - 3 210 -3.21 E03
4 321 4321 E00 - 321 -321 E00
432.1 432.1 E00 - 32.1 -32.1 E00
43.21 43.21 E00 - 3.21 -3.21 E00
1.234 1.234 E00
0.123 4 123.4 E-03 - 0.123 -123 E-03
0.012 34 12.34 E-03 - 0.012 3 -12.3 E-03
0.001 234 1.234 E-03 - 0.001 23 -1.23 E-03
0.000 123 4 123.4 E-06 - 0.000 123 -123 E-06