Pepperl+Fuchs IUH-F117-V1-CN Скачать руководство пользователя

Страница: 12 / 50

-0

IUH-F117-V1-*

Product Description

Bank 11: User Memory

Segment

Bank 11

contains an area to which the user has free access. This size

of this area depends on the chip type, or the area may not be present.

The data in segment

Bank 11

is addressed via the single read words (SR), single

write words (SW), enhanced read words (ER), and enhanced write words (EW)

commands. (see "Single Read Words SR" on page 33, see "Single Write Words

SW" on page 34, see "Enhanced Read Words ER" on page 34, and see

"Enhanced Write Words EW" on page 35)

4.2.6

Electronic Product Code (EPC)

The electronic product code is a unique identifier in the form of a sequence of

numbers. The number sequence has a set structure and a length of 64 bits, 80

bits, 96 bits, or longer (depending on the EPC Ident number used). This number

sequence is saved to the RFID tag, offering worldwide unique identification of the

tagged object.

The system of Electronic Product Codes (EPC) was defined by GS1/EPCglobal

for use in inventory management. Tags with memory banks for EPC codes must

be programmed by the user. The memory of new tags must not contain any valid

EPC codes. The EPC numbers are managed and assigned by GS1. To obtain

EPC numbers, please contact the GS1 branch in your country

(http://www.gs1.com/contact).

The electronic product code is defined by EPCglobal with at present 13 different

encryptions. SGTIN-96 (serialized global trade item number) is given here as an

example of a frequently used encryption. SGTIN-96 has a defined format, and is

structured as follows:

Header

: The header specifies the EPC standard used, and denotes the

number sequence.

Filter value

: Denotes the unit of the product, for example, end product, ad-

ditional packaging, pallet.

Partition

: Denotes the point at which the following company prefix ends

and the object data begins.

Company Prefix

: Assigned sequence of numbers that identifies the pro-

ducer.

Object class

: Sequence of numbers that describes the object, e.g., item

number.
The company prefix and the object class are each of variable length, but to-

gether are always 44 bits long.

Serial number

: Sequence of numbers that identifies the item, for example,

the sequential serial number of the item.

8 Bit

3 Bit

20 - 40 Bit

4 - 24 Bit

38 Bit

0011 0000

011

dez

0614141

dez

203886

dez

000734

dez

Header Filter value Partition Company Prefix

Object class

Serial number

Length

Value

Содержание IUH-F117-V1-CN



















































Результаты поиска

Содержание IUH-F117-V1-CN

Отзывы:

Похожие инструкции для IUH-F117-V1-CN

Бренды по названию

Популярные бренды

Pepperl+Fuchs IUH-F117-V1-CN, Руководство пользователя

Результаты поиска

Содержание IUH-F117-V1-CN

Отзывы:

Похожие инструкции для IUH-F117-V1-CN

Бренды по названию

Популярные бренды