Ident-I • IRI-KHD2-4HB5 / IRI-KHA6-4HB5
Operation with the INTERBUS
Subject to reasonable modifications due to technical advances.
Copyright Fuchs, Printed in Germany
Fuchs Group • Tel.: Germany (06 21) 7 76-0 • USA (330) 4 25 35 55 • Singapore 7 79 90 91 • Internet http://www.pepperl-fuchs.com
D
a
te
of
is
su
e
2
7.
08
.2
0
0
1
29
Device identification; SUB = 9
After setting sub-address SUB = 9, the device identification is output in bytes 0 and 1.
Bytes 2 and 3 have the value 0.
Software version; SUB = 10
For service purposes the software version is output after setting the sub-address
SUB = 10. The contents of the field are as follows:
Bytes 2 and 3 have the value 0.
Status; SUB = 11
After setting the sub-address SUB = 11, the device status is output. The contents of
the field are as follows:
Bytes 2 and 3 have the value 0. For a description of the error bits, see "Failure Diag-
nostics" on page 26.
Parameter; SUB = 12
After setting the sub-address SUB = 12, the current device parameters are output.
The information field corresponds here to the contents of control bytes 0 and 1.
Bit No.
7
6
5
4
3
2
1
0
Byte 0
Index
Ser. No.
Byte 1
Index
Ser. No.
Bit No.
7
6
5
4
3
2
1
0
Byte 0
0
0
0
0
EA
RA
IA
XA
Byte 1
0
0
0
NI
EK
0
0
XK
SUB 4 .. 8 and 13 ... 15 are not used.
