Pepperl+Fuchs IC-KP-R2-V1 Скачать руководство пользователя страница 7

Страница: 7 / 48

IC-KP-R2-V1

Safety

2014-

Safety

3.1

Symbols relevant to safety

3.2

Intended use

The IDENTControl IC-KP-R2-V1 is a control interface including a serial interface for

identification systems. The device can be used as a control cabinet module or for field

applications. Besides the serial connection, suitable inductive R/W heads, microwave

antennas or trigger sensors can be connected. Wiring suitable for the system design must be

used.

3.3

General notes on safety

Only instructed specialist staff may operate the device in accordance with the operating

manual.
User modification and or repair are dangerous and will void the warranty and exclude the

manufacturer from any liability. If serious faults occur, stop using the device. Secure the device

against inadvertent operation. In the event of repairs, return the device to your local

Fuchs representative or sales office.
The connection of the device and maintenance work when live may only be carried out by a

qualified electrical specialist.
The operating company bears responsibility for observing locally applicable safety regulations.
Store the not used device in the original packaging. This offers the device optimal protection

against impact and moisture.
Ensure that the ambient conditions comply with regulations.

Danger!

This symbol indicates an imminent danger.
Non-observance will result in personal injury or death.

Warning!

This symbol indicates a possible fault or danger.
Non-observance may cause personal injury or serious property damage.

Caution!

This symbol indicates a possible fault.
Non-observance could interrupt devices and any connected facilities or systems, or result in

their complete failure.

Note!
Disposal

Electronic waste is hazardous waste. When disposing of the equipment, observe the current

statutory requirements in the respective country of use, as well as local regulations.

Содержание IC-KP-R2-V1

















































Результаты поиска

Содержание IC-KP-R2-V1

Отзывы:

Похожие инструкции для IC-KP-R2-V1

Бренды по названию

Популярные бренды

Pepperl+Fuchs IC-KP-R2-V1, Руководство пользователя

Результаты поиска

Содержание IC-KP-R2-V1

Отзывы:

Похожие инструкции для IC-KP-R2-V1

Бренды по названию

Популярные бренды