Fieldbus terminator
Symbols used
Subject to reasonable modifications due to technical advances.
Copyright Fuchs, Printed in Germany
Fuchs Group • Tel.: G49 621 776-0 • USA +1 330 4253555 • Sin65 67799091 • Internet http://www.pepperl-fuchs.c
Da
te
of
issue
15.04.2015
3
1
Symbols used
2
Intended use
This instruction manual is intended to aid in installing the following fieldbus termina-
tors and placing them in service.
FP-FT-Ex1.I.IEC
Intrinsically safe with connection threading Pg13.5
FS-FT-Ex1.I.IEC
Intrinsically safe with connection threading M20 x 1.5
FN-FT-Ex1.I.IEC
Intrinsically safe with connection threading ½" NPT
FP-FT-Ex1.D.IEC
Flameproof enclosure with connection threading Pg13.5
FS-FT-Ex1.D.IEC
Flameproof enclosure with connection threading M20 x 1.5
FN-FT-Ex1.D.IEC
Flameproof enclosure with connection threading ½" NPT
The data sheet for fieldbus terminators contains electrical data of the EC type-exami-
nation certificate and additional information. It is considered part of this instruction
manual.
The fieldbus terminator is used in bus systems (PROFIBUS PA or FOUNDATION
fieldbus) based on the Fisco model. It is manufactured in a flame-
proof and intrinsically safe design and is clearly identified by the labeling on the rating
plate.
This symbol indicates a warning about a possible danger.
In the event the warning is ignored, the consequences may range from
personal injury to death or from damage to equipment to destruction.
This symbol warns of a possible fault.
Failure to observe the instructions given in this warning may result in
the device and any facilities or systems connected to it developing a
fault or even failing completely.
This symbol brings important information to your attention.
The data sheet can be downloaded from www.pepperl-fuchs.com.
