Pepperl+Fuchs EXTA3 K1 Series, Руководство пользователя

Страница: 23 / 33

EXTA3* Keyboard
Installation and Commissioning
5
4
7
5
0
7
2
0
1
9
-0
9
23
3 Installation and Commissioning
3.1 Connecting the Keyboard Connection Cable
Connecting the Keyboard to a PC Using the Keyboard Connection Cable
1.Connect the wires of the keyboard connecting cable as shown in the table below.
2.After connecting the keyboard, tighten the screws on the EXTA3 cover to a torque of 0.5 Nm.
Wire assignment for the keyboard and mouse (EXTA3-K *)
Connecting the Keyboard to a PC Via SK-PC-D2-UU1-10-HS Barrier
1.Insert the USB plugs of the keyboard cable into the USB connections of the barrier. Use the
front USB connections labeled "field."
2.Insert the USB plugs of the supplied USB cables into the USB connections of the barrier. Use
the front USB connections labeled "Host."
3.Insert the USB plugs of the supplied USB cables into two unused USB connections on the
PC.
Establishing Equipotential Bonding
Note
For information about installation and connection in North America, see control drawing 116-
0357C.
Caution!
Hazardous area
Energized non-intrinsically safe circuits may only be connected or disconnected outside the
potentially explosive atmosphere.
Output 1
Keyboard (field)
1+ V+ Power supply Green
2+ D+ Input/output Brown
3- D- Input/output Gray
4- V- Power supply Yellow
Output 2
Mouse (field)
5+ V+ Power supply Red
6+ D+ Input/output White
7- D- Input/output Pink
8- V- Power supply Blue
Note
For further information, refer to our SK-PC-D2-UU1-10-HS manual and
documentation at www.pepperl-fuchs.com.
Warning!
Explosion hazard
Grounding via keyboard
Danger to life and serious property damage. The housing must always be
connected to the protective conductor. Two options are available:
Connection via the cable shield of the connection cable
Installation in a metal housing that is connected to the PE