Pepperl+Fuchs Ex-DRAGON-D101, Техническое руководство, Страница: 11 / 105

EXDragD101_V104_TH_E.doc/ 13.05.08 page 10
5 Ex Scanner EX-DRAGON-D101
The Ex scanner EX-DRAGON-D101 can be used in hazardous areas Zone 1, Zone 2 and type -3D in
Zone 22. The scanner is able to read all standard code families. After a successful read a beep to indicate a
good read is send out for easy working.
The most important data in brief:
Protection type EEx ib IIC T4 oder EEx ib IIB T4
BVS 03 ATEX E 362
Classification in accordance with ATEX II 2G EEx ib IIC T4
II 2G EEx ib IIB T4
Declaration of Conformity, use in Zone 22 Ex-Dragon-D101-10-3D
II 3D X T 80 °C IP 53
Connection
to PC by ENT-DC via COM-Port (DSUB 9-Pin), serial
Ambient temperature range: -20°C
≤
t
U
≤
+50°C
(due to ex-standards)
(Standard range: deviating for 40°C / 1,4W und 70°C / 1,2W)
Degree
of protection IP 53
5.1 Pin Assignment
The Ex scanner Ex-Dragon-D101 is supplied with a quarter-turn (bayonet) type connector.
Circular connector 4 pin (IP54)
A (1*) = Rx+
B (2*) = Tx+
C (3*) = U+
D (4*) =
⊥
GND
* Clamp to: ENT-DC (X1)
TERMEX (X2) panel mounting, for surface mounting case not necessary.
IPC-4 (X4) (EXVID / REX panel mounting), for AXENA, LETO, FERA not necessary.
VisuNet (X2) when mounting in case ABGxx not necessary
The connecting cable can be extended to the following maximum length:
EX-DRAGON-D101-10-20 bis zu 200m
EX-DRAGON-D101-10-5 bis zu 10m
Warning:
In ex-area (zone 22) plug the connector with
disconnected power!