peplink Pepwave Surf SOHO, Руководство пользователя

Страница: 54 / 151

PepVPN
PepVPN is the core engine of Peplink site-to-site VPN technology.
It is ideal for establishing a secure tunnel over any WAN link.
On top of all the benefits of IPsec and other conventional VPN technologies, the PepVPN engine also offers:
Long-distance Ethernet cable − PepVPN allows a secure and seamless Ethernet tunnel over any IP connection (Layer
2 over Layer 3). It virtually provides a long-distance Ethernet cable over any WAN link.
Works in any dynamic IP environment − PepVPN is fully compatible with any dynamic IP environment and NAT,
allowing you to establish a VPN behind a NAT gateway or firewall without worrying about static IP addresses (one public
IP address is needed to establish a PeVPN Connection).
To start, navigate to Network > VPN > SpeedFusion and enter a Local ID and click save.
This device will be identified by other SpeedFusion Peers by this local ID
When a PepVPN connection is established between sites, the local LAN subnet and subnets behind the LAN (defined
under
Static Route on the LAN settings page) will be advertised to the VPN. All VPN members (branch offices and
headquarters) will be able to route to local subnets.
Note that all LAN subnets and the subnets behind them must be unique. Otherwise, VPN members will not be able to
access each other.
All data can be routed over the VPN using the 256-bit AES encryption standard. Each profile specifies the settings for
creating a VPN connection with one remote Pepwave or Peplink device.
The Pepwave Surf Soho supports 2 PepVPN remote peers per device (5 with upgrade license).
https://www.peplink.com 54 Copyright @ 2021 Peplink