Port-based Authentication (802.1.X)
The IEEE 802.1X standard defines the port-based network access control that is used to provide
authenticated wired access to Ethernet networks. Access to the port can be denied if the authentication
process fails.
After configuring your radius server with the required authentication methods, enable port authentication
on the Peplink switch by selecting the checkbox and configuring the other required fields
A new configurable option "Authentication Method" will appear in "Port Settings" when this option is
saved and applied. See
Standalone menu options > Configure > Interfaces > Switch Ports
Standalone menu options > Configure > Port Mirroring
With port mirroring enabled, the switch sends a copy of all network packets seen on one or more ports to
another port, where the packet can be analyzed.
The destination port is configured in this section.
Mirror ports can be defined under Port Settings page.
Copyright & Trademarks
Specifications are subject to change without notice. Copyright © 2020 Pepwave Ltd. All Rights Reserved. Pepwave and the Pepwave logo are
trademarks of Pepwave Ltd. Other brands or products mentioned may be trademarks or registered trademarks of their respective owners.
