CONFIGURATION
7
DMZ
– Allows a DMZ host acting as neutral zone between the private network and the
outside network.
Enable/Disable:
Enable or disable the DMZ function. Default is disabled.
DMZ IP Address:
This is an IP address of a LAN computer for which all incoming
accesses to the MANGA Point’s WAN IP address will be redirected to.
Wireless setup
– Configures the wireless interface.
SSID:
SSID of the access point, default is “
MetroFi
”.
CTS/RTS threshold:
Threshold (measured in byte) to enable CTS/RTS handshaking
flow control, default is
2347
.
Fragmentation threshold:
Threshold (measured in byte) to split an IP packet in a
burst of smaller fragments, default is
2346
.
Level A signal strength:
Lower limit of level A’s signal strength (measured in dBm),
default is
-40
.
Level A PER:
Lower limit of level A’s packet error rate (measured in percentage),
default is
2
.