CONFIGURATION
6
3.2
CPE Setup
LAN Interface
– Configures IP address over the LAN interface.
IP Address/Subnet Mask:
Enter fixed IP address and its associated subnet mask.
Default is
192.168.1.1/255.255.255.0
.
DHCP Server
– Allows you to enable or disable the DHCP function. DHCP server is
enabled by default.
Start IP Address:
Start of available range of IP addresses that can be assigned.
Default is
192.168.1.10
.
Stop IP Address:
End of available range of IP addresses that can be assigned.
Default is
192.168.1.250
.
NAT outgoing traffic
– Allows multiple users to access the Internet sharing a single IP
address.
Enable/Disable:
Enable or disable the NAT function. NAT server is enabled by
default. You are not able to access Internet if NAT is disabled.