Pentruder CW630, Руководство оператора

Страница: 21 / 21

Operator’s Manual Pentruder CW630 HF Chain Saw – Original instructions Page 21
Technical Data 7
For technical data for the Pentruder HF ‐ power pack please refer to the Operator’s Manual for that products.
Pentruder CW630 ‐ HF Chain Saw
RECOMMENDED GENERATOR SIZE See Operator’s Manual for HF ‐ drive system.
WATER FITTING Tema series 1800
LENGTH 58.5 cm (23 in)
HEIGHT 26.5 cm (10.5 in)
WIDTH 24 cm (9.5 in)
WEIGHT 15 kg (33 lbs)
WATER COOLING
Min. 4 litres (1 gallon) of cool water per minute at full power output.
Water pressure:
Min 1.5 bar (20 PSI)
Max 6 bar (90 PSI)
NOISE LEVEL
(SOUND PRESSURE LEVEL)
94 dB @ 1 m (3 ft) (Kpa=3dB)
NOISE LEVEL
(SOUND POWER LEVEL)
103 dB @ 1 m (3 ft) (Kwa=3dB)
VIBRATION
2.4 m/sec² (front handle) (Uncertainty K=1.5 m/sec²)
4.5 m/sec² (rear handle) (Uncertainty K=1.5 m/sec²)
TORQUE 13.0Nm (9.5 ft ‐ lbs)
HORSEPOWER 9.0 kW (12.0 hp)
Approximate cutting rates 7.1
MATERIAL Cutting rate
CONCRETE – 15 cm (6 in) 12 cm/min (5 lineal in/min)
RED BRICK – 15 cm (6 in) 25 cm/min (10 lineal in/min)
REBAR ‐ #4 (12 mm)
10–20 seconds through each piece
Rebar must be encased in concrete, NEVER cut bare rebar with a Diamond
Chain.