Operators manual for the Pentruder 6-12HF and Pentpak HF-power pack – Original instructions
Page
16
Mounting the saw head on the track
The saw head runs on the track on four conical rollers. The upper rollers are fitted on eccentric
shafts, opened and locked by turning the handles. Fold the saw onto the track, the lower “eccentric”
rollers engaged first. Move the saw head slightly along the track to engage the travel gear with the
rack, then fold the saw completely on to the track, press the locking pins and turn the handles until
the locking buttons pops up again.
Warning! Before the saw is operated, always check that the eccentrics are locked in
position to prevent the saw from falling off the track. Do not turn the handles unless the
locking pins are released.
Warning! Always check that the handles are locked before starting to cut.
Locking pin
Eccentric shafts
Handle
