EN-7
Care to be Taken During Handling
Take the international warranty card with you when you travel abroad. Also take the Worldwide Service
Network that is included in the package. This will be useful if you experience problems abroad.
When the camera has not been used for a long time, confirm that it is still working properly, particularly
prior to taking important pictures (such as at a wedding or during traveling). Contents of the recording
cannot be guaranteed if recording, playback or transferring your data to a computer, etc. is not possible
due to a malfunction of your camera or recording media (SD Memory Card), etc.
The lens on this camera is not exchangeable. The lens is not removable.
Do not clean the product with organic solvents such as thinner, alcohol or benzene.
Places of high temperature and humidity should be avoided. Particular care should be taken regarding
vehicles, which can become very hot inside.
Storing the camera where pesticides and chemicals are handled should be avoided. Remove from case
and store in a well-ventilated place to prevent the camera from becoming moldy during storage.
Do not use the camera where it may come in contact with rain, water or any other liquid, because the
camera is not weather, water, or liquid resistant.
Ensure that the camera is not subjected to substantial vibrations, shocks or pressure. Place the camera
on a cushion for protection when the camera is subjected to the vibrations of a motorbike, car, or ship, etc.
The temperature range in which the camera can be used is 0°C to 40°C (32°F to 104°F).
The liquid crystal display will become black at high temperatures but will return to normal when normal
temperatures are returned to.
The response speed of the liquid crystal display becomes slow at low temperatures. This is due to the
properties of the liquid crystal and is not a fault.
Periodic checks are recommended every 1 to 2 years in order to maintain high performance.
If the camera is subjected to rapid temperature changes, condensation may form on the inside and
outside of the camera. Therefore put the camera in a bag or plastic bag, and take the camera out when
the difference in temperature has subsided.
Avoid contact with garbage, dirt, sand, dust, water, toxic gases, salt, etc. as this may cause damage to the
camera. If rain or drops of water get onto the camera, please wipe dry.
