EN-34
Using the Self-Timer
The self-timer can be used in situations such as group shots. When using this option, you should either mount
the camera on a tripod (recommended) or rest it on a flat, level surface.
1. Secure the camera to a tripod or place it on a stable surface.
2. Rotate
the
mode
dial
to , , , ,
or .
3. Press the Power switch to turn on the power.
4. Toggle the four-way controller (
X
/
) until your desired self-timer
mode appears on the LCD monitor.
5. Compose your scene and press the shutter release button.
The self-timer function is activated.
The photograph is then taken after the preset time.
To cancel the self-timer at any time, press the four-way
controller (
X
) or press the shutter release button halfway.
The table below will help you choose the appropriate self-timer mode:
After one shot is taken, the self-timer mode is turned off.
If you wish to take another image using the self-timer, repeat these steps.
Self-timer mode
Description
Timer off
The self-timer is off.
2 seconds
The image is captured about 2 seconds after the shutter is pressed. This mode
is useful for preventing camera shake.
10 seconds
The image is captured about 10 seconds after the shutter is pressed. This mode
is suitable for the shots in which the photographer has to be included.
10+2 seconds
The first image is captured about 10 seconds after the shutter release button is
pressed, and then the second image is captured 2 seconds later. This mode is
convenient when capturing group images in succession.
2
10
