9. Connection pairing
10. Maintenance and cleaning
11. Disposal
12. Declaration of conformity
14. Warranty
The additional camera and the smart recorder DF400R must be paired with
each other to establish the wireless connection. The cameras delivered in the
DF400 Set are already paired with the smart recorder on channel 1 and 2. In
order to connect an additional camera to the smart recorder (maximum 2
additional cameras) proceed as follows:
Select “Pairing” ([49] - Camera Settings) using the direction buttons.
Tap the camera channel number to which a new camera should be paired.
Press the pairing button [14] of the camera within 35 seconds.
The products are maintenance-free: do not open the housings
Check the safety and function regularly
Remove the mains adapters from the mains sockets before cleaning
Use a soft, slightly moist cloth or brush to clean the surfaces
Packaging material or electrical products must not be disposed of as
household waste. Use your recycling system. Details are available
from your local authority.
Indexa GmbH , Paul-Böhringer-Str. 3, D- 74229 Oedheim declares that this
product DF400K complies with the basic requirements and the other relevant
regulations of Directive 2014/53/EU. Conformity has been demonstrated.
The complete declaration of conformity can be read at: www.indexa.de
In addition to the statutory guarantee from the vendor, the manufacturer
warrants this product for 2 years from date of purchase (proof from receipt)
according to following conditions.This warranty does not affect your legal
rights.
The warranty covers use of the product in normal conditions in private
!
!
!
!
!
!
!
13. Legal Notices
This product or software may contain or make use of code under the GNU
General Public License v2 e.g. the linux kernel, the GNU Lesser General Public
License v2.1 or the Apache licence v2.0.
For further information regarding license terms and – where required by license
– source codes please send an email to [email protected] to get them
free of charge. Some licenses, however, require the provision of physical copies
of the source code. In this case, you may obtain a copy of the source codes by
contacting us as well via [email protected]. A nominal fee (i.e., the cost
of physically performing the source distribution) will be charged for this service.
your copy of this product may not contain code covered by one or more of
the licenses listed here, depending on the exact product and version you choose.
The corresponding license texts can be found at the end of the manual.
Note:
households. It only covers manufacturing defects and is limited to the
replacement or repair of the faulty components. It does not include wear and
tear, or batteries.
The warranty applies only when the product is used according to the operating
instructions. It does not cover damage arising from misuse, improper handling,
application of force, dust, dirt, water or other environmental factors, or from
incorrect voltage from batteries or power supply.
The warranty is void when the product has been repaired or tampered by
unauthorised persons and when it has been used with components which are
not specified by the manufacturer.
In case of a warranty claim please contact the vendor for details of how to
proceed and how to return the product if necessary. Only carriage paid
authorised returns will be accepted. Repairs can only be accepted when
accompanied by a full description of the fault. After the warranty period has
expired repairs will be charged and are not always possible. Warranty claims do
not extend the warranty period and the warranty for replacement parts expires
with the warranty for the product.
Unless there is a statutory obligation, the manufacturer is not responsible for
further claims, including peronal or material damages, arising from the use of
the product or from nonfunction or misfunction of the product.
Indexa GmbH
Paul-Böhringer-Str. 3
74229 Oedheim
Germany
www.indexa.de
Subject to change
14 - GB
