- do not change the DHCP setting (this makes the automatic connection with your home
network possible)
- the code can be changed from the default 123456
- the DID (Device Identification Number) is listed here, this is required for setting
up the internet function
(Melody setting for Alarm clock and Timer)
- Select the duration of the melody
- Select the desired melody
(The times should be set in the submenu/Time/Clock Alarm)
Power Saving On (Enable) or Off (Disable)
When power saving is enabled, the screen will switch to black after 2 minutes after the last use. To
show the screen again tap the On/Off button [7]. During Motion detection or Scheduled Recording
the screen will automatically switch on.
Auto-lock enabled/disabled
30 seconds after the last use all the touch screen tabs will be removed from the screen, the camera
image remains. To reenable the touch screen,tap the On/off button [7]
- 5 Wake-up times can be set and activted (tick) or deactivated (X)
- Set the real time and date
- After the set duration (maximum 59 minutes and 59 seconds) the melody will sound
(AM: 0.00-12.00 / PM: 12.00-24.00)
Activates formatting of the SD card and deletes the stored files
In case of any new firmware, this will be found in "www.indexa.de" in Download section
Remove the SD card from the monitor.
Load the new firmware-software from your PC to the SD card.
Insert the SD card into the monitor.
Start the "System-Upgrade"
The version number of the firmware in the monitor can be found in Network settings [58] / Network
Information.
- Reset and menu language selection
After selecting the language the monitor will switch off automatically. Switch on the monitor
(button x) and follow the instructions on the screen. The default settings are reactivated.
for following subjects:
Installation and service range / How to set up motion detection / Instant Record / View recorded video / Storage and
delete / Connect to internet / Remote viewing access / PTZ operation / How to pair a new camera / Power Save mode
Network Setup
Internet Setup
Security code
Network Information
Alarm Setup
Period
Melody
System Setup
Power Saving
Screen Auto-lock
Time Menu
Clock Alarm
Time Setting
Timer
Format Storage
System Upgrade
Default
Quick Tips
Default: disabled
Default: disabled
Default: no times set
[58]
[53]
[55]
[60]
[62]
[64]
[59]
[61]
[63]
[57]
•
•
•
•
•
•
•
•
•
•
•
•
32 -
GB
