Pentair Sta-Rite EcoSelect Enviromax 800, Руководство пользователя

Страница: 10 / 20

2. Speed Selection
Press for low speed Press for medium speed Press for high speed
• Filtration and water
circulation • Cleaning with a suction
cleaner • Backwashing filter.
• Operating some water
features such as jets or
waterfalls.
• Solar heating
The EnviroMAX 800 comes pre-programmed with the following default speeds:
3. Variable Speed Adjustment
Press to turn power on/off. If power is removed, motor will return to the last speed
selected when power is restored. Motor will remember ON/OFF state.
Press and hold button corresponding to speed you wish to
change.
Hold for 3 seconds and a light should begin to flash.
To decrease speed by 50rpm increments with 1000rpm as the
minimum limit
To increase speed by 50rpm increments with 2850rpm as the
maximum limit
To save the current speed setting and return to normal
operation mode
Will cancel the change and revert back to the original speed
and return to normal operation mode
Holding all 3 buttons for 3 seconds will reset the speeds to
default
If the default speed settings do not perfectly match the particular installation. They can be adjusted as
follows.
1450RPM 2400RPM 2850RPM
1.
2.
3.
9
,
or
+ +
Operation