manualshive.com logo in svg

Pentair S06, Инструкция по эксплуатации, Страница: 12 / 64

Поделиться
Скачать
Pentair S06 Скачать руководство пользователя страница 12

© 2015  Pentair Equipment Protection

89116616

- 12 -

SMART CONTROLLER

INTRODUCTION

The smart controller is a parametric controller for the complete management of air conditioners. All settings are 

pre-programmed at the factory. Cooling set-points, cooling differential and high/low temperature alarm set-

points can be adjusted by the user. Alarms are outputted through a relay contact.

NOTE: The polyester tape on the top side and the neoprene seal around the connectors 

assure IP34 protection for the controller. Do not remove.

ENERGIZING THE CONTROLLER

The controller is wired and programmed at the factory to be energized when power is applied to the air 

conditioner.

CONTROL STATUS INDICATION

The display has numerous symbols that indicate if the controller is heating, cooling, alarming, if the compressor 

is enabled, and if the ambient fan is enabled. The 3 alpha-numeric characters further describe alarms and show 

the cabinet temperature by default.

NOTE: The Slim Fit air conditioners do not come standard with a heating option.

Heating (sun)

Cooling

(snowflake)

SYMBOL

COLOR

ICON ON

ICON FLASHING

1

AMBER

Compressor On

Start-up Request

2,3,4

AMBER

Not Used

Not Used

A

AMBER

Compressor On

Not Used

B

AMBER

Evaporator Fan On

Not Used

C

AMBER

Not Used

Not Used

D

AMBER

Not Used

Not Used

E

AMBER

Not Used

Not Used

F

RED

Alarm Active

Not Used

G

AMBER

Controller Active

Not Used

H

AMBER

Not Used

Not Used

NOTE: On the smart controller, the display symbols for “H” and “E” are not suppose to 

turn ON. If they do turn on, simply hold the “Heating” button for 5 seconds to disable 

them. Then hold the “Cooling” button for 5 seconds until the snowflake symbol (“G”) 

displays.

Содержание S06

































































Отзывы:

Нет отзывов