1
REBEL™ Suction Side Pool Cleaner Installation and User’s Guide
iii
IMPORTANT WARNING AND SAFETY INSTRUCTIONS
Disclaimer of Liability About your Pool and Cleaner
There are a multitude of factors that contribute to the life of your
pool. The pool cleaner is a very passive product that will have no
impact on pool life.
Please be aware that over time, deterioration, discoloration and
brittleness of any pool finish can be caused separately by, or in
combination with, age, an imbalance in pool water chemistry,
improper installation and other factors. Suction side pool
cleaners, such as the
pool cleaner, will not remove or cause wear
on “good” pool plaster. In fact, the opposite is true–pool plaster
will eventually cause wear on the cleaner.
The same situation holds true for vinyl-lined in-ground swimming
pools, because vinyl liners are also affected by the environment
and factors such as pool water chemistry, sunlight and the pool’s
surroundings. Therefore over time, vinyl can become brittle and
weak. In addition, vinyl-lined pools are affected by the
workmanship, composition and installation of the liner and the
workmanship and quality of construction of the supporting walls
and pool base. These are all factors which can contribute to liner
failure. The existence of any of these type of conditions in your
pool is not caused by the use or operation of the pool cleaner. The
manufacturer disclaims any liability for repairs or replacement to
any of these structures or components of the customer’s pool.
The pool owner must assume all responsibility for the
condition and maintenance of the pool’s surface, water and
deck.
Before the cleaner is installed, please take a moment to record
the serial number. This number is located under the rear handle of
your cleaner. You will be asked for this number when you
contact our Technical Support Department.
SERIAL #__________________________________
SAVE THESE INSTRUCTIONS
iii
IMPORTANT WARNING & SAFETY INSTRUCTIONS
REBEL
®
2
Automatic Vacuum Pool Cleaner Owner’s Manual
REBEL
®
2
Automatic Vacuum Pool Cleaner Owner’s Manual
POOL PREPARATION
1
REBEL™
Suction Side Pool Cleaner Installation and User’s Guide
POOL PREPARATION
1. Rebel
™
cleaner body
2. Hose float
3. Threaded Adaptor
4. Reducer Cone
5. Regulator valve
6. Elbow
7. Flow gauge
8. Hose Set – 11 Sections
-10 Standard Hoses
-1 Leader Hose
Cleaner Components
Remove the cleaner and all parts from the box. Check to be sure all components are included.
Pool Preparation
Before installing the Rebel
™
Suction Side Pool Cleaner, your pool should be clean and algae-free so as to not
inhibit the cleaner’s traction. If necessary, make the following preparations before proceeding:
1. Chemically balance the pool water.
2. Brush pool and let the debris settle.
3. Hand vacuum thoroughly.
4. Clean filter and pump strainer basket.
1.
2.
Standard Hose
Leader Hose
8.
Figure 1
7
5
4
6
3
Standard Hose
Leader Hose
1.
2.
8.
Figure 1
5
4
3
6
Pool Preparation
Before installing the Rebel
™
Suction side pool cleaner, your pool should be clean and algae-free so as to not inhibit the
cleaner’s traction. If necessary, make the following preparations before proceeding:
1. Chemically balance the pool water.
2. Brush pool and let the debris settle.
3. Hand vacuum thoroughly.
4. Clean filter and pump strainer basket.
Cleaner Components
Remove the cleaner and all parts from the box. Check to be sure all components are included.
1. Rebel
™
cleaner body
2. Hose float
3. Threaded Adaptor
4. Reducer Cone
5. Regulator valve
6. Elbow
7. Flow gauge
8. Hose Set - 11 Sections
- 10 Standard Hoses
- 1 Leader Hose
7
