2 / 2
THERMAL MANAGEMENT SOLUTIONS
EN-RaychemPMKGLE-IM-H54075 01/13
WWW.THERMAL.PENTAIR.COM
© 1991-2013 Pentair.
PN 143823-000
NORTH AMERICA
Tel: +1.800.545.6258
Fax: +1.800.527.5703
Tel: +1.650.216.1526
Fax: +1.650.474.7711
EuROPE, MIddLE EAsT, AfRICA
Tel: +32.16.213.511
Fax: +32.16.213.603
AsIA PACIfIC
Tel: +86.21.2412.1688
Fax: +86.21.5426.2917
LATIN AMERICA
Tel: +55.11.2588.1400
Fax: +55.11.2588.1410
Pentair, BTV, QTVR, LBTV2 and KHP are owned by Pentair or its global affiliates. All other trademarks are the property of their respective owners. Pentair
reserves the right to change specifications without prior notice.
BTV-CR, BTV-CT, QTVR-CT, LBTV2-CT, KHP-CR
Bus wire
Conductive core
Inner jacket
Braid
Outer
jacket
3/4 in
(20 mm)
2
1
4
3
5
• Slide parts onto heating cable.
• Remove exposed braid.
• Secure end seal to pipe using correct
tape (GT-66 or GS-54).
• Apply insulation and cladding.
• Install label on outside of cladding.
• Leave these instructions with the end
user for future reference.
• Lightly score outer jacket.
• Bend heating cable to break jacket
at score, then peel off jacket.
• Push heating cable
completely into end
seal body.
• Seat grommet and
tighten screws.
WARNING: Use of the
wrong grommet can
result in leaks, cracked
components, shock or
dielectric failure, and
will invalidate
approvals and
certifications
• Identify heating cable type.
• Select correct grommet from table below.
Heating cable
Type
Grommet
BTV, QTVR
-CR or -CT
RED
LBTV2
-CT
K *
KHP
-CR
RED
*
Order separately
Identify Heating cable Type
