PROWLER
™
917 Robotic Inground Pool Cleaner Installation and User’s Guide
English
8
Cleaning the Impeller
Always disconnect power to the cleaner before servicing, disassembly, or reassembly. Failure to
do so could result in death or serious .
Every so often debris may become trapped in the Prowler™ 917 Robotic Pool Cleaner’s impeller. To clean out debris
trapped in the impeller opening, follow the instructions below.
STEP 1:
Open the Filter Cover and Remove the Basket
See
Figure 17
and
18.
Figure 17
Figure 18
STEP 2:
Remove Debris from Impeller Cover
By hand, clean as much debris as possible from the
opening of the cleaner’s impeller. See
Figure 19
.
Sometimes the debris may become lodged deeper in the
impeller where you can not reach it. If this is the case,
proceed to the next step to remove the impeller cover.
Figure 19
STEP 3:
Unmount the Impeller Cover
Using a No. 2 Phillips-head screwdriver, remove the
two screws that hold the impeller cover in place. These
screws can be found in the bottom corners of the
impeller cover. See
Figure 20
.
Place the two screws to the side.
Figure 20
STEP 4:
Remove the Impeller Cover
Gently pull the impeller cover away from the cleaner
body. See
Figure 21
.
Figure 21
By hand, remove any debris that has become trapped
around the impeller.
Remount the impeller cover with two impeller cover
screws.
MAINTENANCE
Содержание PROWLE 917
Страница 43: ......