Pentair Onga WaterSwitch WS1500200, Руководство пользователя

Страница: 12 / 24

10
The WS1500200 model WaterSwitch is equipped with the H OInformer. The
2
H OInformer allows you to see your actual water saving. The H OInformer can
2 2
be detached from the WaterSwitch and be placed conveniently in the kitchen
or other room within 20 metres of the WaterSwitch and will continue to give
up to date water readings as you require them. The Pairing process creates
a unique code between the H OInformer and the WaterSwitch.
2
Pairing the H OInformer
2
1. Press the “manual override” button on the WaterSwitch cover while
powering up the WaterSwitch. Red status light will blink 3 times,
acknowledging the switch activation
2. Release the switch when the green status LED starts blinking. Green LED
blinking indicates that WaterSwitch is going into pairing mode
3. Hold down the “mode” button on H OInformer for 3 seconds. The
2
H OInformer will go into search mode, with “search” displayed on the
2
LCD screen
4. After pairing is complete, “paired” will be displayed on the LCD screen
When pairing is complete, WaterSwitch will be communicating with the
H OInformer and this can be verified by the green LED if tank is full and
2
orange LED if tank is empty, on the WaterSwitch blinking at 1 second
intervals. The red LED on the H OInformer will blink each time it receives
2
a signal.
H OInformer
2
Status
Manual
Override