Pentair Hypro 3377 Series, Оригинальное руководство пользователя, Страница: 8 / 12

- 8 -
Maintenance and Servicing
Information
ATTENTION: Divert or stop all flow to and from the Cleanload system before performing any service or maintenance
procedures.
ATTENTION: Always wear proper Personal Protective Equipment when handling chemicals including gloves, eye
protection, respirator and safety shoes.
ATTENTION: Always dispose of chemicals and contaminated water in accordance with national and local laws and
statutes.
Disposal
When disposing of a Hypro Cleanload, be sure to remove all fluids from the Cleanload before scrapping. These fluids
should be disposed of in a manner which complies with local and national regulations. Never dump fluids onto the ground.
Once the pump is free of all fluids, it may be scrapped in accordance with local and national laws.
Cleaning
Always flush the Cleanload with clean water after each day’s use, if switching chemicals, or if the system is going to be
inactive for an extended period of time. Ensure that the components of the Cleanload are free of any chemical buildup or
residue, both inside and out. Failing to properly clean the system could lead to reduced performance and component life.
Be sure to thoroughly clean the eductor, ball valves, and the internal components in the glove box. Cycle the ball valves
open and close during rinsing to ensure they are clean.
Maintenance, Routine Servicing, and Inspection
PREVENTATIVE MAINTENANCE CHECK-LIST
Check Daily Weekly Yearly
Water Leaks X
Plumbing X
Window clarity X
Glove wear X
Clogged or leaking breather X
Clogged or leaking check valve X
Leaking check valve X
Replace gloves and window X
• Each system’s maintenance cycle will be exclusive. If system performance decreases, check immediately.
• Duty cycle, temperature, quality, type of fluid being pumped, and inlet feed conditions all affect the life of spray boom
assemblies and service cycle.
• Label partial containers “seal is broken”.
• No sharp objects.