5
PENTAIR HOME SUMP CONTROLLER HOMEOWNER'S GUIDE
1. Unplug your existing sump pump from wall outlet.
2. Plug your pump’s cord into the top outlet of the
Sump Controller.
3. Plug the Piggyback Switch into the bottom outlet
of the Sump Controller.
4. Plug the Pseudo Plug into the back of the
piggyback switch
5. Plug the included reed float switch wires into
the side of the Sump Controller.
6. Plug the Sump Controller into the wall outlet.
7. Secure the High Level Switch to the discharge
pipe with a cable tie. It should be located near
the top of the sump pit.
Pump
Pseudo
Plug
Float
Switch
INSTALL THE SUMP CONTROLLER