Pentair F783E, Руководство по эксплуатации

Страница: 7 / 33

F783E Ex ‐ ia
Pg 7
00 ‐ ISN ‐ 203_Rev B
29/01/2021
Incorrect use of the control head F783 Easymind Ex ‐ ia may be dangerous to people, nearby equipment and the
environment.
The control head has been designed for use as actua on of pneuma cally operated valves and / or for recording the switching
states of these.
The authorised data, the opera ng condi ons and condi ons of use speci fi ed in the contract documents and opera ng
instruc ons are to be observed during use. These are described in Chapter "6. Technical Data".
In view of the large number of applica on op ons, check and, if required, test prior to installa on whether the control head is
suitable for the speci
fi c applica on case.
If you are unsure, please contact your Pentair Flow Technologies Paci fi c Pty. Ltd contact.
The device may be used only in connec on with third ‐ party devices and components which have been recommended or
approved by Pentair Flow Technologies Paci fi c Pty. Ltd.
Any unauthorized reconstruc ons and changes to the control head are prohibited for safety reasons.
Correct transporta on, correct storage and installa on as well as careful opera on and maintenance are essen al for reliable
and problem
‐ free opera on.
For connec ng the control head, use line installa ons that do not cause any mechanical stresses.
Use the device only as intended.
If expor ng the system/device, observe any exis ng restric ons.