7
I. Pool Requirements
• E-Z Vac
®
is recommended
for use in pools that have a cove* height of at least 6 inches. Pool coves
less than 6 inches may inhibit the cleaner’s operation.
* The pool “cove” is the embankment between the pool wall and floor. It is generally constructed with
either a banked or radius shape as shown in Figure 1.
• E-Z Vac
®
is not recommended
for use in pools with no cove (with a 90° floor-to-wall angle). The
absence of a cove may affect the cleaner’s operation by inhibiting its random-pattern coverage.
II. Preparation Of Your Pool
Before assembling and installing your E-Z Vac
®
, your pool should be clean and algae-free so as not to
inhibit the cleaner’s traction. If necessary, make the following preparations before proceeding:
1. Chemically balance the pool water.
2. Brush pool and let the debris settle.
3. Hand vacuum thoroughly.
4. Clean filter and pump strainer basket.
III. Assembly
Remove E-Z Vac
®
and all of its parts from the box and check to make sure that all components were
included. Refer to Figure 2.
Components Check List
1. E-Z Vac
®
2. Weighted Bumper Strap
3. Flow Indicator
4. Vacuum Regulator Valve
5. Threaded Compression Adapter
6. Eyeball Diverter & Outer Ring
7. Hose Weight
8. Aboveground Seal
9. Hose Protector
10. Hose - 32 ft. total length
(not shown)
RECOMMENDED
NOT RECOMMENDED
FLAT BOTTOM NO COVE
FLAT OR DISH-SHAPED BOTTOM WITH COVE
BANKED COVE
RADIUS COVE
Minimum 6"
6" Minimum
Figure 1.
Serial Number
1.
2.
4.
5.
9.
7.
6.
8.
Figure 2.
