© 2016 Pentair Equipment Protection
89115007
- 3 -
APPLICATION
These electric-finned heaters are designed to be used in small enclosures or cabinets
where measuring instruments, control valves or similar equipment in hazardous areas
must be heated.
Vertical-finned heaters heat the area by transferring the heat to the surrounding air,
creating convection current. This type of heater is recommended when it is not possible
to mount a heating block directly to a flat surface.
CP heaters must be installed with a thermostat to avoid damage to the heater.
Thermostat models (HLTSTAT10C, HLTSTAT20C) are sold separately.
If maintaining a constant temperature in the enclosure is desired, an additional
temperature controller should be used.
TECHNICAL DATA
DESIGN DATA
DAHHL400XA
DAHHL600XA
Rated voltage (VAC)
120
(108-132
range)
230
(207-253
range)
120
(108-132
range)
230
(207-253
range)
Maximum Rated Current (Amps)
(acc. to DIN VDE 0298)
10
10
Nominal power [W]
400
600
Temperature class
T3
T3
Ambient temperature
-76 to +140 F
(-60 to +60 C)
-76 to +140 F
(-60 to +60 C)
Maximum permissible operating
temperature range at normal
rating
-76 to +302 F
(-60 to +150 C)
-76 to +302 F
(-60 to +150 C)
Installation position
Fins vertical
Fins vertical
Connection cable
39 (1m) long silicone
cable, notch and oil
resistant,
3x AWG16;
Ø 0.37 (9.4mm)
39 (1m) long silicone
cable, notch and oil
resistant,
3x AWG16;
Ø 0.37 (9.4mm)
Conduit connection
½ NPT
½ NPT
Ingress Protection
IP66 / IP68
(1bar/30min)
IP66 / IP68
(1bar/30min)
Material
seawater-proof
aluminium, black
anodized
seawater-proof
aluminium, black
anodized
Height (in./mm)
8.9 (225)
12.8 (325)
Width (in./mm)
9.0 (229)
9.0 (229)
Depth (in./mm)
2.4 (60)
2.4 (60)
Weight (lb./g)
7.9 (3600)
11.7 (5300)
