1. Using hammer,
tap clamp onto flange
Side Mount Flange Clips
2. Twist clip into required orientation
3. Press MC/AC cable into clip
Rotate clip
as needed
1. Press fastener against flange,
tap straight down
(1/16" to 1/4" flange or C purlin)
2. Press MC/AC cable into clip
C and Z Purlin
Figure 5
Figure 7
Figure 6
1. Nail or screw clip to structure
2. Press MC/AC cable into clip
Offset Bracket
Figure 8
Part Number Figure
Application
MAC224SM
5
1 or 2 runs of MC/AC to 1/8" [3] through 1/4" [6] flange
MAC258SM
1 or 2 runs of MC/AC to 5/16" [8] through 1/2" [13] flange
MAC2912SM
1 or 2 runs of MC/AC to 1/2" [13] through 3/4" [19] flange
Part Number Figure
Application
MAC2VF14
6
1 or 2 runs of MC/AC to 1/16" [2] through 1/4" [6] C purlin or vertical flange
MAC2123
7
1 or 2 runs of MC/AC to Z purlin
Part Number Figure
Application
MAC2AO
8
Offset bracket for 1 or 2 runs of MC/AC cable
TECHNICAL SUPPORT:
www.erico.pentair.com
CFS242_F
INSTRUCTION SHEET
3 OF 4
© 1997-2017 Pentair All Rights Reserved
Pentair, CADDY, ERICO CADWELD, ERICO CRITEC, ERICO, ERIFLEX, and LENTON are owned by Pentair or its global affiliates. All other trademarks
are the property of their respective owners. Pentair reserves the right to change specifications without prior notice.