Pentair 188623 Скачать руководство пользователя страница 2

Страница: 2 / 24

IMPORTANT WARNING AND SAFETY INSTRUCTIONS

This guide provides installation and operation instructions for

this product. Consult Pentair with any questions regarding this

equipment.
Attention Installer:

This guide contains important information about the

installation, operation and safe use of this product. This information should
be given to the owner and/or operator of this equipment after installation
or left on or near the filter.

Attention User:

This manual contains important information that will

help you in operating and maintaining this filter. Please retain it for future
reference.

Important Notice:

READ AND FOLLOW ALL INSTRUCTIONS

SAVE THESE INSTRUCTIONS

This is the safety alert symbol. When you see this symbol

on your system or in this manual, look for one of the

following signal words and be alert to the potential for

personal injury.
Warns about hazards that can cause death, serious

personal injury, or major property damage if ignored.
Warns about hazards that may cause death, serious

personal injury, or major property damage if ignored.
Warns about hazards that may or can cause minor

personal injury or property damage if ignored.

NOTE

Indicates special instructions not related to hazards.

Carefully read and follow all safety instructions in this manual and on

equipment. Keep safety labels in good condition; replace if missing or

damaged.

Never exceed the maximum operating pressure of
the system components. Exceeding these limits
could result in a component failing under pressure.
This instantaneous release of energy can cause
the closure to separate and could cause severe
personal injury or death if they were to strike a
person.

Due to the potential risk that can be involved it is
recommended that the pressure test be kept to
the minimum time required by the local code. Do
not allow people to work around the system when
the circulation system is under pressure test. Post

appropriate warning signs and establish a barrier around the pressurized
equipment. If the equipment is located in an equipment room, lock the
door and post a warning sign.
Never attempt to adjust any closures or lids or attempt to remove or
tighten bolts when the system is pressurized. These actions can result in
a separation or failure of system components. This instantaneous release
of energy can cause components to be accelerated to high velocities and
to travel far distances. These components could cause severe personal
injury or death if they were to strike a person.

RISK OF ELECTRICAL SHOCK OR
ELECTROCUTION.

This filter must be installed by a qualified service
professional in accordance with the National Electrical
Code and all applicable local codes and ordinances.
Always disconnect power to the equipment at the

circuit breaker before servicing any of the equipment. Ensure that the
disconnected circuit is locked out or properly tagged so that it cannot be
switched on while you are working on the pool equipment. Failure to do
so could result in serious injury or death to serviceman, pool users or
others due to electric shock.
Position the filter and the air relief valve to safely direct water drainage and
purged air or water. Water discharged from an improperly positioned filter
or valve can create an electrical hazard that can cause severe personal
injury as well as damage property.

Consumer Information and Safety

This filter is designed and manufactured to provide many years of safe
and reliable service when installed, operated and maintained according
to the information in this manual and the installation codes referred to in
later sections. Throughout the manual, safety warnings and cautions are
identified by the “ ” symbol. Be sure to read and comply with all of the
warnings and cautions.

Before installing this product, read and follow all
warning notices and instructions which are included.

Failure to follow safety warnings and instructions can result in severe
injury, death, or property damage. Call (800) 831-7133 for additional free
copies of these instructions.

Do not operate the filter until you have read and
understand clearly all the operating instructions and

warning messages for all equipment that is a part of the pool circulating
system. The following instructions are intended as a guide for initially
operating the filter in a general pool installation, however each installation
may have unique conditions where the starting procedure could be
different. Failure to follow all operating instructions and warning messages
can result in severe injury, death, or property damage.

To avoid this potential hazard, follow these instructions:
1. Before repositioning valve(s) and before beginning the assembly,

disassembly, or adjustment of the clamp or any other service of the
circulating system: (A) Turn the pump

OFF

and

shut OFF

any automatic

controls to ensure the system is NOT inadvertently started during the
servicing; (B) open the

manual air relief valve; (C) stand clear of the

filter; (D) wait until all pressure is relieved.

2. Whenever installing the filter clamp

FOLLOW THE

FILTER CLAMP