2
‘CF6’ SERIES PUMP WITH TRAP
To avoid unneeded service calls, prevent possible injuries,
and get the most out of your pump, READ THIS MANUAL
CAREFULLY!
The Sta-Rite ‘CF6’ Series Self-Priming Centrifugal Pump:
• Is designed for use with swimming pools or as a
centrifugal pump.
• Is an excellent performer; durable, reliable.
Table of Contents
Safety Instructions ........................................................2
Installation.................................................................3-4
Electrical ...................................................................4-5
Operation.....................................................................6
Storage/Winterizing ...................................................6-7
Pump Service ............................................................7-8
Troubleshooting Guide .................................................9
Repair Parts List ..........................................................10
Warranty ....................................................................12
Technical Support
Sanford, North Carolina
(8 A.M. to 5 P.M. EST)
Moorpark, California
(8 A.M. to 5 P.M. PST)
Phone: (800) 831-7133
Fax: (800) 284-4151
www.pentairpool.com www.staritepool.com
READ AND FOLLOW SAFETY
INSTRUCTIONS!
This is the safety alert symbol. When you see this
symbol on your system or in this manual, look for one
of the following signal words and be alert to the potential
for personal injury.
warns about hazards that
will
cause death,
serious personal injury, or major property damage if ignored.
warns about hazards that
can
cause death,
serious personal injury, or major property damage if ignored.
warns about hazards that
will
or
can
cause
minor personal injury or property damage if ignored.
NOTICE
indicates special instructions not related to hazards.
Carefully read and follow all safety instructions in this
manual and on equipment.
Keep safety labels in good
condition; replace if missing or damaged.
Incorrectly installed or tested equipment
may fail, causing severe injury or property
damage.
Read and follow instructions in owner's manual when
installing and operating equipment. Have a trained pool
professional perform all pressure tests.
1. Do not connect system to a high pressure or city water
system.
2. Use equipment only in a pool or spa installation.
3. Trapped air in system can cause explosion. BE SURE
all air is out of system before operating or testing
equipment.
Before pressure testing, make the following safety checks:
Check all clamps, bolts, lids, and system accessories before
testing.
Release all air in system before testing.
Tighten Sta-Rite trap lids to 30 ft. lbs. (4.1 kg-m) torque for
testing.
Water pressure for test must be less than 25 PSI (7.5 kg/cm
2
).
Water Temperature for test must be less than 100° F. (38° C).
Limit test to 24 hours. After test, visually check system to be
sure it is ready for operation. Remove trap lid and retighten
hand tight only.
NOTICE:
These parameters apply to Sta-Rite equipment
only. For non-Sta-Rite equipment, consult manufacturer.
IMPORTANT
SAFETY INSTRUCTIONS
Always follow basic safety precautions with this
equipment, including the following.
To reduce the risk of injury, do not per-
mit children to use this product unless they are closely
supervised at all times.
This pump is for use with permanently
installed pools and may also be used with hot tubs and
spas if so marked. Do not use with storable pools. A
permanently installed pool is constructed in or on the
ground or in a building such that it cannot be readily
disassembled for storage. A storable pool is con-
structed so that it may be readily disassembled for stor-
age and reassembled to its original integrity.
SAVE THESE INSTRUCTIONS
Содержание Sta-Rite CF6 Series
Страница 11: ...11 ...
