6
5.
4.
7.
1.
3.
2.
6.
10.
9.
8.
1
I. Preparation Of Your Pool
Before assembling and installing your Kreepy Krauly, your pool should be clean and algae-free so as not
to inhibit the cleaner’s traction. If necessary, make the following preparations before proceeding:
1. Chemically balance the pool water.
2. Brush pool and let the debris settle.
3. Hand vacuum thoroughly.
4. Clean filter and pump strainer basket.
II. Assembly
Remove Kreepy Krauly and all of its parts from the box and check to make sure that all components
were included. Refer to Figure 1.
Components Check List
1. Dive float restrictor
2. Kreepy Krauly
3. Locking end clip
4. Roller bumper strap
5. Hose weights
6. Wings
7. Eyeball diverter and outer ring
8. Hose Protector
9. Valve cap
10. Automatic regulator valve
11. Threaded compression adapter
12. Pleated or Starfish seal
13. Hose – 40 ft. total length (not shown)
14. Installation manual (not shown)
16. Pleated or Starfish seal
17. Hose – 40 ft. total length (not shown)
18. Installation video (not shown)
Step 1. Attach The Wings
Kreepy Krauly’s wings snap into place – no tools are needed. Position the wings so you bring the band
around the main body as shown in Figure 2. Slip the wings into the groove in Kreepy Krauly’s main
body, then snap the band clamp into place.
Main Body
Wings
Serial Number
11.
or
For Concrete Pools Only
Figure 1
Figure 2
9.
10.
11.
12.
8.
