Pentair Pool Products Kreepy krauly Platinum LL505PM, Инструкция по установке и эксплуатации

Страница: 17 / 28

9
Kreepy Krauly ® Platinum ™ Installation and User’s Guide
Adjusting the Kreepy Krauly ® Platinum ™
Thrust Jet Adjustment
For maximum pool cleaner performance, you may need to manually adjust the Thrust
Jets due to varying pool shapes. The Thrust Jets are located in the back of the unit
and determine the direction of the cleaner.
Adjust the Thrust Jets to direct the Kreepy Krauly ® Platinum ™ in a straight line.
The factory position is set so both jets are turned slightly right. Small adjustments
can have a signifi cant effect on the cleaner movement.
• Moving thrust jets to the right : cleaner turns towards the right.
• Moving thrust jets to the left : cleaner turns towards the left.
Note : As Jets are adjusted inward, the cleaner will have more power but may not be
able to travel in a straight line, as this can create too much water cross fl ow.
Sweep Hose Adjustment
The Sweep Hose operates in a gentle sweeping motion to prevent debris from
becoming trapped in hard to reach corners of pools.
If the sweep hose motion is too fast, it can interrupt the straight line path of the
cleaner. If the motion is too slow, the hose may not be able to properly clean the
bottom and sides of the pool.
To increase or decrease the motion of the Sweep Hose, adjust the screw located on
the Feed Mast Barb below the Ballast Float.
• To decrease sweep hose motion, turn the screw clockwise .
• To increase sweep hose motion, turn the screw counter clockwise .
Both jets turned slightly right
Alternate Position
RIGHT LEFT RIGHT LEFT
Factory Position